inkscape laser cutter shading vs cutting

INKSCAPE LASER CUTTER SHADING VS CUTTING HOW TO

That said, some of the most common materials for cutting AND engraving include the following: Many materials, like foam core, cut well but melt. Second, materials with low melting temperatures. When chlorinated materials burn they release gasses that can be hazardous to humans and the operation of the machine. However we have some limitations.įirst, nothing with chlorine in it can be cut or etched. Send your file to to get a quote by email.The short answer to the question of what you can laser cut is anything that burns. If you used rasterization, please put it on 150DPI to make sure images stay crisp.Ĭongratulations! Your file is ready for cutting. To prevent issues with versions you have to save the file as an EPS file. Repeat this process until all shared lines are removed. The corners of the line have a yellow glow. Herhaal deze stap voor het andere hoekpunt van de lijn. Repeat this step for the other corner as well.‘break path at selected nodes’ knop. Use the edit paths by node tool to select one of the corners of the shared line. It can be fixed by following the upcoming steps. This is also cut twice and results in a lower level of precision and bigger burn marks. For example two rectangles that are drawn against each other. So please check this to be sure the material is not cut twice.Ī more common problem is shapes that have one shared side. Double lines take longer to cut, cost twice as much, leave a bigger burn mark on the edges and damage the cutting table.

If this is case you also need to delete the rest.

Delete one line to see whether there is another one underneath. These lines look darker than single lines. They lie on top of each other and are hard to notice. It’s possible your drawing consist of double lines after tracing an image. The cutter works in the following order: Desc.įor example, black is deep engraving, red is shallow engraving, yellow are the inner cutting lines and blue the outer cutting lines. Remember to only use this in extraordinary cases.

It is possible to have more control over the cutting order when something has to be engraved at different depths for example. It automatically first cuts the smallest parts and works its way to the bigger parts. It is not necessary to manually give in the order in which the machine engraves or cuts. The laser cutter optimizes the cutting process. For more details see the cutting or engraving part of this tutorial. Engraving can be done by not using a stroke and only use a greyscale to black fill. Vector engraving lines have to be RGB blue with a stroke weight of 0.01mm without any fill. This way the font is converted to paths and will keep its appearance.Īttention!: Do this step in the end of the process because you cannot change the text after this step.Ĭutting lines have to be RGB red with a stroke weight of 0.01mm without any fill. The only thing you need to do is convert it to outlines. Remove it before emailing the file to us. The lines are now paths and can be used by the laser cutter.Īttention!: The original bitmap image is still behind your line drawing. Select the image and click ‘Trace Bitmap’. If you want to cut or vector engrave them, you need to convert these images (JPEG,BMP, PNG, etc.) to vector line drawings. Rasterized or bitmap images can only be engraved. White is not engraved, light grey is the shallowest and black the densest. The density control is exactly the same as with fills. Color images are being converted to a greyscale image via dithering. The laser cutter can interpret raster images for engraving without any problems. Gradients can also be used and are treated the same way by the machine. All shades of grey in between make a difference in density. On average light grey (RGB – 230,230,230) is the shallowest and black the densest. By using shades of grey you can control the density of the engraving. The color is RGB blue which is also available in the default swatches.Īll fills are engraved. The stroke weight has to be 0.01 mm and the color RGB red. These are the outlines of the shape you want to cut. The file contains the margins and colors you can use.

INKSCAPE LASER CUTTER SHADING VS CUTTING HOW TO

How to setup a file that our laser can work with?Ĭhoose the size of the material you want to use.

Inkscape laser cutter shading vs cutting